Shunt Regulator: Fine-Adjust HV, 4.10Ω, 15W
This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a precision-adjustable set point (4 V to 35 V), a shunt resistance of 4.10 ohms, and a total of 32 SMT shunt resistors populated on both sides of the PCB.
Pololu’s shunt regulators are designed with adjustable set-points to accommodate any voltage from approximately 5V to 35V. To use the shunt regulator, install it across (in parallel with) your power supply. Under normal conditions, the supply voltage should be below the set point of the shunt regulator, and the regulator should only draw its quiescent current of less than 0.5 mA. However, any voltage spikes above the set point will cause the shunt regulator to draw substantially more current, dissipating energy and limiting the extent of the voltage change.
- Minimum Output Voltage: 4V
- Maximum Output Voltage: 35V
- Shunt Resistance: 4.10 Ohm
- Power: 15W
- Maximum Quiescent Current: 0.5mA
- Size: 0.8" x 1.125" x 0.33"